NESCAF Filter Kit Question
March 28, 2008 - 16:17 — Bill Bonadies
In the step that says apply audio to C9, the audio I want to apply is from my rig. Do I connect one lead of my audio output to C9 and the other to ground?
- Bill Bonadies's blog
- Login or register to post comments
User login
Coming Up
Recent comments
- Lower noise/offset configuration
1 week 4 days ago - NEScaf problem resolved.
2 weeks 1 day ago - Hi, Chris.Sorry to hear about
2 weeks 4 days ago - Can't get NEScaf filter to work
3 weeks 1 day ago - Just finished mine!
4 weeks 4 days ago - NESCaf pulls them out of the mud
8 weeks 3 days ago - Transplant...
10 weeks 2 days ago - Call sign change
11 weeks 1 day ago - Call Sign Change
11 weeks 5 days ago - The pictures I took at today's NEQRP Meeting at Kilarney’s Pub N
11 weeks 6 days ago
Comments
NEScaf Filter Project
In the step that says apply audio to C9, the audio I want to apply is from my rig. Do I connect one lead of my audio output to C9 and the other to ground?
Bill Bonadies W4NRY
Testing the NEScaf- audio in
That's right, Bill. If you use the output of your rig, connect the 'hot' audio lead to C9 on the NEScaf board, and the ground lead of the radio to the ground of the filter board.
GL, Bruce N1RX